Thông tin sản phẩm
Dụng cụ nhấn cáp DINTEK 6103-01006 dùng cho nhân dọc/ nhân 180 độ
DINTEK F-Tool (6103-01006)
Part Number: 6103-01006
Dụng cụ nhấn 4 đôi cáp vào ổ cắm, dạng ngang.
DINTEK ezi-TOOL180 – Vertical Tool
The DINTEK ezi-TOOL180TM system is an all-in-one punch down and wire trim process, designed to ensure even connections, better performance and faster fit off times. The ezi-TOOL180TM is for use with 180degree Cat.5e, Cat.6 and Cat.6A modular keystone jacks.
Features
– Vertical and horizontal jack versions available
– All-in-one punch down of 8 wires
– Even wire trim process
– Maintains gas tight IDC connections
– Minimizes return loss & cross talk
– Multi use keystones can be used in ezi-TOOL and also standard punch down tool
Applications
– Premise wiring
– Cable assemblies
– For use in DINTEK’s Cat.5e, Cat.6 or Cat.6A installations
– Standardize connections on IDC
Benefits
– Maintains gas tight IDC connections
– Insertion loss reduction
– Removes risk of insulation and/or keystone jack damage
– Multi use ezi-JACKS can be used in both ezi-TOOL and standard punch down tools
– Wires are pushed down over IDC instead of impact 110 style
– The removal of impacting to terminate, improves return loss and cross-talk at termination points
– Less termination failures and better overall bandwidth
Dụng cụ nhấn cáp F-Tool, bấm cáp mạng vào Keystone Jack dạng dọc
- Nhấn cáp 1 lúc 4 đôi vào ổ cắm mạng dạng dọc.
- Phù hợp với da dạng loại cáp hiện nay gồm Cat.5e, Cat6, Cat.6A…
- Đảm bảo sự tiếp xúc của lõi cáp và Keystone Jack là tốt nhất.
- Cho phép bạn vừa có thể nhấn và cắt lõi cáp đồng thời.
- Giảm thời gian thi công và tăng hiệu suất công việc.
Dụng cụ nhấn cáp dạng dọc F-Tool DINTEK 6103-01006
DINTEK F-Tool, dụng cụ nhấn cáp 1 lúc 4 đôi vào ổ cắm mạng dạng dọc, nó cho phép bạn có thể vừa nhấn cáp vào Keystone Jack vừa có thể cắt đi những lõi cáp dư ra, đảm bảo các đầu tiếp xúc đồng đều, hiệu suất tốt hơn và giảm thời gian thi công.
Ứng dụng
- Premise wiring
- Cable assemblies
- For use in DINTEK Cat6A, Cat6 or Cat5e Installations
- Standardize connections on IDC
Một số loại nhân dọc tiêu biểu của DINTEK
Các sản phẩm tương đương tham khảo
Dụng cụ nhấn cáp Commscope PN 1725150-6 chuyên dùng cho nhân dọc hay còn gọi là nhân 180 độ
Dụng cụ nhấn cáp Ancomteck 180 độ ACT-PDT-760A
Dụng cụ nhấn cáp Ancomteck 90 độ ACT-PDT-760B